Mophie Juice Pack Pro for iPhone 4/S Review

Gear Diary is independently owned and operated. We receive compensation through advertising and from the companies whose products we review, usually in the form of the reviewed product. We test the products supplied to us, and the opinions expressed are our own.

Gear Diary is also reader-supported. When you buy through links posted on our site, we may earn a commission at no cost to you. You can learn more by clicking here.

_juicepackpro1

Tough on your iPhone 4/S? Prone to drops and breaks, and your slim case just isn’t cutting it? Want longer power for your iPhone? If you said yes to any of these questions, you might want to consider taking a gander at the Mophie Juice Pack Pro.

Designed to exceed the U.S. military’s MIL-STD 810G specifications, barring any full submersion in liquid, the Mophie Juice Pack Pro will keep your iPhone safe and secure under most conditions. While lacking complete immersion protection, the case will protect your device from rain and splashes, sand and dust, vibration and shocks, as well as drops and bumps.

The Mophie Juice Pack Pro package contents included the instruction manual, the assembled Mophie Juice Pack Pro with black faceplate/bezel, micro-USB charging/data cable, a belt clip mount as well as an internal screen protector. I write “internal” because the Juice Pack Pro’s bezel has its own protective capacitive screen cover that sits snugly atop the phone. In use the phone felt as responsive as an iPhone with a screen protector, even with essentially two screen protectors in place.

NOTE: To view a larger image of a given picture, click on it, then click on the image again and the original larger-sized image will be shown.

jpp2a

The boxed unit I received contained a black faceplate, but other colored faceplate and “boot” combos can be obtained from Mophie as well. However, also included separately was a red bezel, which I chose to use…my phone is a sort of “red phone” after all for IT work, so the color seemed eminently suited to its frequent IT-emergency use.

Here are the two bezels, the outer rubberized “boot” and the external 2500 mAh battery with built-in camera aperture.

jpp2c_A

Here is a closer look at the battery un-docked…

jpp3a

Docked with my iPhone…

jpp3c_A

Note how the bottom speaker and microphones are ported out the front just below where the phone docks into the battery. During my testing, I didn’t notice any significant degradation of sound level or quality, which was a big plus.

A closer view of the lower front with bezel and boot (outer non-slip rubberized case) in place…

jpp920a

The Home button cover above was responsive and only required a hair more pressure than normal to use.

The backside, where the camera aperture is deeply recessed…this had an unexpected side-effect that I will elaborate on later in the review.

jp912a

(Note to self…wipe off fingerprints before inserting phone into Juice Pack Pro!)

The first real trick was to determine how best to open the Juice Pack to insert the phone in the first place. For reference, here is an exploded diagram from Mophie:

mophiejppexplodeThe key was loosening up the rubberized boot enveloping the bezel and battery, which was in itself an initial challenge because the boot has a lip around its edge that slips into the front bezel to keep the phone waterproof. I found that lifting the small tab just above the case battery indicator did the trick to get the ball rolling, and in no time I had the case disassembled. On the upside, a properly assembled case stands no chance of accidentally slipping off.

Continuing our tour of the Juice Pack Pro, here are some additional walk-around shots of the case assembled, but just prior to boot installation to showcase some of the case features. On the bottom of the case you will note that there is no external 30-pin connector port available. Instead, you have a battery status indicator, where pressing the large button to the left of the four LEDs illuminates the LEDs and shows the approximate battery life available. Note this is the external battery life indicator, not the current phone charge.

jpp7a

So, how does one connect the Juice Pack for charging? On the bottom right corner of the case is a shrouded micro-USB port, shown here sans protective case boot.

jpp910aSimply plug in the included cable (or any other compatible micro-USB data/charge cable) to your computer or charger of choice and charge away. Fortunately, you can still sync data with your iPhone as well via the cable, which is a nice touch.

All right, so we have a battery nestled next to the iPhone, but how to activate the battery? On the side opposite the charge port is a simple switch.

Red is off…

jpp8a

Green is on (hopefully you do not have deuteranopia)…

jpp9aOnce the switch is flipped, the battery actuates and begins charging the internal battery. The external 2500 mAh battery has no means of detecting the iPhone’s battery state, so it will continuously attempt to charge the internal battery if left on, even if internal battery capacity is at 100%. This can be tricky for a busy user, as it wouldn’t be too hard to forget the external battery was left in the charge state and consequently deplete the reserve battery unnecessarily. As far as charging went, once my phone charge dwindled to around 20% and I switched on the external battery I could squeeze close to three full charges before having to recharge the Juice Pro battery itself.

The mute button and volume switches can be seen here in their recessed ports. Note the mute button port is suited for either 4 or 4S iPhone models.

jppredbezela

The top of the case had recessed ports for the iPhone’s audio jack and power button, as well as a screen for the noise-cancelling microphone to keep out detritus.

jpp911a

While getting the waterproof boot off was tricky, getting it back on took a little effort, as slipping the boot over the side bezel anchors and sealing the edges took some practice as seen in this shot from the right side of the Juice Pack Pro. The boot rim should be even, but I haven’t quite got it to sit right above the anchors, though I was able to get it properly set later on.

jpp914a

Left side…

jpp913aNote how the ports on this side are protected. The volume buttons are shielded from direct contact and worked well but required a bit extra pressure to adjust levels. The other ports require peeling back the rubberized lips to access.

Top view with case completed. Power button is completely encased and audio jack protective flap in place…

jpp918a

The power button with flap pulled back…

jpp916aThe mute button…

jpp917aThe charging/sync port…

jpp915aAnd finally the audio jack…

jpp919a

The port covers fit snugly over their respective ports and easily bend back in place, so there is really little danger of them flopping loose.

Just how big is the case? Roughly three times as thick and a centimeter or two longer, and obviously heavier. Size-wise, this case is not for the faint-hearted or those enamored of thinness. It IS bulky and adds weight.

jppsize925a

Can’t fit the big case in your pocket? Mophie includes a carrying clip to handle the Juice Pack Pro.

Here’s the back of the clip-on holder…

jpp4a

With the case clipped securely in (backside of case always faces outwards for additional protection)…

jpp6a

Top view…

jpp5aThe clip is adjustable so wearers can choose to wear the phone horizontally or vertically or angled in between.

How about taking pictures with the case on? Do you recall my comment about the deep camera aperture? There is one other significant issue that might be a deal-breaker for some: pictures where flash is needed. If a user takes a picture without requiring flash, the picture is more or less fine…

jppPIC1However, if the flash is engaged…

jpp_PIC2What happened? The deeply recessed camera behind the external battery caused the flash to rebound off the deep battery aperture. Result? Potentially ruined shots. Depending on the lighting conditions, the reflection can be less noticeable—but it is always noticeable. This in my opinion is a serious issue in need of addressing as it limits the iPhone’s camera use to well-lit scenes, so if you’re of a nocturnal disposition (to all vampires, that’s a Bloody Mary in the photos) or taking night-life pictures, you are likely out of luck.

That drawback aside, the case is rugged. It endured holiday drops and bumps and being used in a busy home kitchen and even pesky sneak attacks from our puppy (yes, a shameless plug for our new 2 pound Chihuahua-Min Pin-Terrier mix puppy named “Poppy”). As anyone with young dogs has learned, they love to chew…and chew…and chew…

jpp921aMmm…a resilient, rubberized case, or a chew toy? While I let her gnaw for a few moments, I wasn’t about to let her drag my hapless iPhone back to her den under the toy box, and the phone and case endured, hardly showing a scratch or tooth-mark, at least on the boot portion, though I wouldn’t recommend trying this with a larger breed.

For those intrepid users who want a ruggedized case with additionally long battery life but are willing to forgo taking pictures with the flash, the Mophie Juice Pack Pro might be just the ticket. To be sure the Mophie Juice Pack Pro is targeted at a specific market…this is probably most useful for individuals who do a lot of outdoor activities or work in an environment where device impact injury is more likely, say construction or equipment technical services. However, if you are a perennial butterfinger tired of having to repair dings, dents and cracked screens, the higher initial case cost might be worth the peace of mind and cover the cost of a typical screen replacement in the first place.

Mophie Juice Pack Pro  MSRP $129.95

What I Like: Superb battery life enhancement; very rugged, durable design; nice choice of bezel and boot colors to customize appearance; water-resistant; ports protected but accessible; outer case component has a nice grippy feel—but not to rubbery so as to attract dust and lint

What Needs Improvement: Very bulky; camera flash impedance can cause picture problems; pricey

Source: Manufacturer provided review sample

As an Amazon Associate, we earn from qualifying purchases. Thanks for your support!

About the Author

Gear Diary Staff
Gear Diary was founded on September 30, 2006, with the goal to create a website that would not easily be labeled. Everyone who is part of Gear Diary is a professional who uses technology in their work and daily lives. On this site, we share our enthusiasm while exploring the gear we use — the equipment that makes our lives easier, more entertaining, more productive, and more manageable. Our hope is that Gear Diary visitors find this site to be a welcoming, friendly, and accessible place to learn about and discuss interesting topics — and not only those that are tech-related! Gear Diary is a place to discover and explore all kinds of new gear, including smartphones, computers, kitchen gadgets, Toys, EDC, camping gear, or even your next new car! You can follow us on Twitter @GearDiarySite.