Rokform RokShield v3 for iPhone 5 Review and CES Booth Gallery

Gear Diary is independently owned and operated. We receive compensation through advertising and from the companies whose products we review, usually in the form of the reviewed product. We test the products supplied to us, and the opinions expressed are our own.

Gear Diary is also reader-supported. When you buy through links posted on our site, we may earn a commission at no cost to you. You can learn more by clicking here.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 08

When opting to put my iPhone in a case these days, I tend to go one of two directions. I either seek out a slim, minimalist case that will protect my iPhone from scratches while adding the least amount of weight and bulk, or I put the phone in a LifeProof case for maximum protection. The new Rokform Rokshield v3 for iPhone 5 that arrived the other day may change that.

The Rokshield v3 isn’t exactly minimalist, but it also doesn’t offer the maximum protection found in a LifeProof. Instead it falls somewhere between the two extremes. Actually allow me to correct that — it falls somewhere between the two, since this single case offers two levels of different protection depending upon how you choose to use it. More than that, this case is part of a larger system that not only protects your iPhone but also allows you to secure it to different surfaces.

Let’s take a closer look. Oh, and don’t miss the gallery of pictures taken during my booth tour during CES.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 51 1

Gear Diary Rokform Rokshield V3 Case for iPhone 5 33

The case looks like a single slider case with a locking mount. It is, in fact, two cases in one. It also offers two methods of attachment, the second of which is already “hidden” inside the case.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 18

The case includes an interior “high impact polycarbonate frame” and an outer “shock absorbing rubber outer bumper”. Best of all, you can use the interior frame on its own for those times you want a thinner, lighter case or you can throw on the outer bumper when you need extra protection.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 50

The case includes:

• The injection molded polycarbonate frame :: v3

• The elastomer rubber protective outer bumper

• A thermoplastic elastomer non-slip grip insert

• A remote Mounting System (RMS) which lets you mount the case most anywhere you want

• A magnetic mounting that allows you to attach to any magnetic surface.

• A Rokgard screen protector (My case included 2 but I suspect this was a mistake)

Gear Diary Rokform Rokshield V3 Case for iPhone 5 58

The interior portion of the case is a (mostly) traditional slider case. The bottom portion slides off once you lift the small tab of material that overlays the upper portion and “locks” it in place.

The outer ring is made from a soft material. It simply slides over the interior case when you want to use it. Once in place, it not only protects all of the sides, but it also sits atop the Home button for added protection.

Gear Diary Rokform Rokshield V3 Case for iPhone 006

The iPhone slides in with ease. Thanks to the design of the case it also happens to offer a nice degree of lay-on-the-table protection.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 47

I’ve run into slider cases that required a good degree of force to get the iPhone in place. That isn’t situation here. The phone does need to be pushed into the case, but there isn’t a lot of force necessary.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 19 1

The slider case leaves a nice space open for the sleep/awake button.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 12

The volume buttons and mute toggle switch are left open as well.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 24

On the opposite side there is a gap for the microSIM card. Other than wanting this opening in order to make sure the case is balanced I’m not sure why this opening would be here. After all, it isn’t like you will be swapping out the microSIM on a daily basis. Then again, having open portions in the case that don’t reduce its ability to protect the phone does help keep the weight down.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 29

The Lightning port, speaker, microphone and 3.5mm headphone jack are all left open but, thanks to the design, the entire area is completely protected by a raised ring of case material. That balance of accessible and protection is hard to achieve and Rokform has done just that with this design.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 03

The back of the case is rather intricate in appearance. The design serves a purpose. The indented areas reduces the weight of the case. The soft area beneath the circle reduces slippage when the case is placed on a smooth surface and hides the magnet that lets the case attach to any metallic surface.

Screen Shot 2013 01 22 at 1 15 17 PM

As noted in the introduction, this is a system more than it is a case. And what a system it is! The circular area works with an assortment of accessories that can be purchased separately. There are stands, belt clipping/bottle opener and much more.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 15

The case comes with one Remote Mounting System (RMS). As previously noted this lets you mount the case almost anywhere you want once you have affixed the mount in place.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 43

It locks in place. To secure the RMS to a surface you can use the 3M VHB and/or screw it into place. The screws are not included but will make this a far more secure attachment system.

Gear Diary Rokform Rokshield V3 Case for iPhone 5 56

And for added bump, drop and screen protection you can quickly put the soft outer ring around the case. It not only added to the side and corner protection, but it also adds to the lay-on-the-table protection AND covers the home button.

The liked the Rokbed for iPhone 4S I reviewed back in August. (Read the review.) This case not only fits the iPhone 5 but it ups the ante by adding an extra layer of protection and including the special magnet. I love the flexibility of being able to easily choose to have “some” or “some more” protection and I love the flexibility all the various accessories can offer. I think I’ll be using this case for the foreseeable future and am going to go shopping for some accessories. After all, why use a case this cool and functional if you don’t take maximum advantage of everything it has to offer.

You can learn more here on the product page. And make sure to check out the gallery of pictures I took at the Rokform CES booth!

MSRP: $49.00

What I Like: Simple slider case or slider with extra protection, you get to choose; Magnetic holder built into the case, Remote Mounting System included too; Multiple accessories available that work with the case; Case itself is affordable and comes with value added thanks to the two mounting options

What Needs Improvement: Not the most refined case available; Adding accessories can add up price-wise

Source: Manufacturer supplied review sample

As an Amazon Associate, we earn from qualifying purchases. Thanks for your support!

About the Author

Dan Cohen
Having a father who was heavily involved in early laser and fiber-optical research, Dan grew up surrounded by technology and gadgets. Dan’s father brought home one of the very first video games when he was young and Dan remembers seeing a “pre-release” touchtone phone. (When he asked his father what the “#” and “*” buttons were his dad said, “Some day, far in the future, we’ll have some use for them.”) Technology seemed to be in Dan’s blood but at some point he took a different path and ended up in the clergy. His passion for technology and gadgets never left him. Dan is married to Raina Goldberg who is also an avid user of Apple products. They live in New Jersey with their golden doodle Nava.