Ford Design Mixes the Old and the New to Extend Their Automotive Lineage

Ford Design Mixes the Old and the New to Extend Their Automotive Lineage

During our time at the #FordNAIAS we had the opportunity to learn about the creative process currently employed by Ford as they bring their new products from concept to reality. What was perhaps most striking about it is the way in which Ford employs both traditional artistic methods and bleeding-edge technology in the process. Let’s look at Ford Design in 2014.

Ford Design Mixes the Old and the New to Extend Their Automotive Lineage

 

“That’s what it is… it is a process”

The first point that stood out was the importance of keeping in mind the fact that this creative process at Ford is truly a process, a creative back and forth between designers, engineers and executives.

Ford Design Mixes the Old and the New to Extend Their Automotive Lineage

All aspects of the car start with the designers stylus or pen. Some designers still like to sketch out their ideas by hand either on sketchpads or tablets.

Ford Design Mixes the Old and the New to Extend Their Automotive Lineage

Others prefer to use computer imagery.

Ford Design Mixes the Old and the New to Extend Their Automotive Lineage

The “design bandwidth” of this iterative process yields a variety of different ideas which are slowly refined and narrowed down.

Ford Design using Oculus Rift HD

As we shared earlier, Ford is using the Oculus Rift HD as part of their Ford design process. Ford also does a good bit of the early design work by hand.

Ford Design Mixes the Old and the New to Extend Their Automotive Lineage

Yes, hand-modeling and digital-milling is still alive and well.

Ford Design Mixes the Old and the New to Extend Their Automotive Lineage

Here’s a quick video demo of the old-school process that is still a central part of the process.

Hand-molded Clay Still Plays a Central Role

The reason for this is rather simple- “ultimately these vehicles need to exist out in the real world. Virtual is great but we always keep full 3D in the studio and in mind throughout the process.”

Ford Design Mixes the Old and the New to Extend Their Automotive Lineage

From there they create 3 dimensional design parts using a bevy of 3D printers that are constantly in operation printing out three dimensional parts that go into models that are the result of a combination of 3D printed and hand-modeled parts. These models look amazingly real but they are still just models.

Feasibility

Ford Design Mixes the Old and the New to Extend Their Automotive Lineage
In the feasibility portion of the design process they look at all aspects of the mode and assess the feasibility of its use in daily life. The also put the car model in a light room and blast it with light to see how the car will look in various situations.
Ford Design Mixes the Old and the New to Extend Their Automotive Lineage
They have a special production line that produces prototype cars and trucks that are real vehicles that can be used and worked on in the real world. Often this is done with the vehicles camouflaged. How seriously is this phase taken? The new Ford F150 prototypes went through over 10 million miles of testing!
Production!
Ford Design Mixes the Old and the New to Extend Their Automotive Lineage
After this lengthy back and forth, a process that includes time-tested traditional modes of design and technologies that are only being implyed by Ford, a final design is reached and… it goes into production. It is great to see that in a world of computer wizardry the artistry of the creative minds at Ford continue to play a central role in building the Ford cars of tomorrow.

As an Amazon Associate, we earn from qualifying purchases. If you are shopping on Amazon anyway, buying from our links gives Gear Diary a small commission.

About the Author

Dan Cohen
Having a father who was heavily involved in early laser and fiber-optical research, Dan grew up surrounded by technology and gadgets. Dan’s father brought home one of the very first video games when he was young and Dan remembers seeing a “pre-release” touchtone phone. (When he asked his father what the “#” and “*” buttons were his dad said, “Some day, far in the future, we’ll have some use for them.”) Technology seemed to be in Dan’s blood but at some point he took a different path and ended up in the clergy. His passion for technology and gadgets never left him. Dan is married to Raina Goldberg who is also an avid user of Apple products. They live in New Jersey with their golden doodle Nava.