Owning a pool is supposed to mean more time swimming and less time chasing leaves around with a net. Unfortunately, the maintenance doesn’t disappear just because the water looks inviting. Beatbot is introducing two cordless robotic pool cleaners, the AquaSense 3 and Sora Neo R, aimed at different kinds of pools and different budgets. Unveiled November 18 at Piscine Global Europe in Lyon and the Pool Spa Patio Expo in New Orleans, the $1,699 AquaSense 3 focuses on spotting and targeting debris, while the $599 Sora Neo R brings automated cleaning and easier retrieval to smaller, simpler pools.
Beatbot AquaSense 3 Takes a More Observant Approach to Pool Cleaning
The Beatbot AquaSense 3 is designed for pool owners who want their robotic cleaner to do more than follow a predetermined route and hope for the best. Its new Sense-to-Act system combines several technologies that allow the robot to map its surroundings, recognize debris, determine where cleaning is needed, and check its work before finishing.

Beatbot AquaSense 3
The process begins with Smart 2D Mapping, which creates a map of the pool floor. Beatbot’s CleverNav navigation system uses that information to develop an efficient cleaning route rather than repeatedly traveling over the same areas. The map is available through the Beatbot app after cleaning, although it only represents the floor, not the walls or shallow platforms.
What makes the AquaSense 3 interesting is its HybridSense AI Vision technology, which can identify more than 40 types of debris. Instead of treating every section of the pool equally, the robot can recognize visible debris and head toward it for targeted cleaning.
Its AI Hunting feature addresses debris first, followed by edge cleaning and a systematic S-shaped cleaning pattern across the floor. Once that process finishes, AI Final Check scans for anything remaining and directs the robot to clean those areas again.
That’s a thoughtful approach for pools surrounded by trees, where leaves, dirt, and other debris don’t necessarily land evenly. A robotic cleaner that recognizes where the mess is concentrated could spend less time cleaning areas that are already clear.
For smaller messes, AI Quick Clean skips the full floor-cleaning routine and concentrates on visible debris. Beatbot estimates that this can reduce cleaning time by up to 50% compared with its Standard Floor Mode. That claim applies specifically to pool-floor cleaning, and the results will depend on conditions.
Cleaning Shallow Ledges and Handling Larger Pools
The AquaSense 3 doesn’t limit itself to the pool floor. It also cleans walls, the waterline, and shallow platforms with water depths starting at 7″. Ultrasonic sensors help it recognize platform edges to avoid dropping into deeper sections unexpectedly.
That could be welcome news for anyone with a tanning ledge or shallow lounging area. These spots can collect dirt and sediment, but their limited depth often makes them difficult for conventional robotic cleaners to reach.

Beatbot AquaSense 3
Four bottom roller brushes work alongside a suction system rated at 6,800 gallons per hour to collect debris and maintain traction while climbing walls. A 3-liter debris basket uses a 100-micron filter to trap leaves, sand, and smaller particles. An optional 3-micron filter, sold separately, provides finer filtration.
The AquaSense 3 handles pools measuring up to 3,229 square feet, including rectangular, round, kidney-shaped, and freeform designs. It’s compatible with above-ground and in-ground pools constructed from concrete, ceramic tile, mosaic, vinyl liners, reinforced PVC membranes, and fiberglass.
Its 10,000mAh battery provides up to five hours of floor cleaning or 4.5 hours when cleaning floors, walls, and the waterline. Recharging through the wireless dock takes up to five hours.

Beatbot AquaSense 3
At 22.3 pounds and measuring 17.76″ long, 17.13″ wide, and 9.17″ tall, it’s not something you’ll want to fish off the bottom of a deep pool regularly. Fortunately, the robot automatically returns to its original entry point and floats at the surface when cleaning finishes or the battery drops below 15%.
If it drifts away, the app’s One-Touch Parking feature can bring it back toward the edge, provided it’s already floating at the surface. That’s an important distinction because the app can’t summon the robot directly from the pool floor.
The AquaSense 3 includes a three-year warranty and supports both 2.4GHz and 5GHz Wi-Fi networks, Bluetooth, app-controlled cleaning modes, cleaning history, and wireless software updates.
Beatbot Sora Neo R Offers a Simpler Solution for Smaller Pools
Not everyone has a sprawling backyard pool with elaborate curves, multiple depths, and a shallow lounging shelf. For someone with an above-ground pool or a smaller in-ground pool with a straightforward layout, spending nearly $1,700 on a cleaner may be difficult to justify.
That’s where the $599 Beatbot Sora Neo R comes in.

Beatbot Sora Neo R
Designed primarily for above-ground pools and flat-bottom in-ground pools with simpler layouts, the Sora Neo R handles pools measuring up to 861 square feet. It accommodates round, rectangular, and kidney-shaped designs and works with concrete, fiberglass, vinyl, PVC liners, and other soft-lined surfaces.
Unlike the AquaSense 3’s debris-recognition system, the Sora Neo R relies on a more conventional S-shaped cleaning path. Two brushless pumps provide a combined suction flow of 5,000 gallons per hour, while active front roller brushes scrub surfaces and soft caterpillar-style tracks help maintain traction.
The robot cleans the floor, walls, and waterline, so you aren’t limited to removing whatever settles at the bottom.
Its 4,500mAh battery delivers up to three hours of floor-only cleaning or 2.5 hours when cleaning the floor, walls, and waterline. Charging takes approximately three hours.
The Sora Neo R weighs just 15.8 pounds and measures 17.17″ long, 12.48″ wide, and 9.37″ tall. Those dimensions make it relatively manageable to carry between storage and the pool, an advantage when you don’t want another bulky piece of equipment competing for space in the garage.
Water Treatment Adds Another Layer of Convenience
One of the Sora Neo R’s more unusual features is its integrated water-treatment compartment, designed to dispense compatible chlorine tablets or clarifier tablets while the robot cleans.
The idea is to combine debris removal with water care in the same cleaning session. Movement through the pool and circulating water from the pumps help distribute the treatment, while the included 3-liter basket and 150-micron filter collect debris and loosened buildup.

Beatbot Sora Neo R
Compatible chlorine tablets measure 1″, and Beatbot has also developed clarifier tablets for the system. However, the clarifier function remains preliminary and could change before the final product specifications are established.
It’s also worth remembering that dispensing chlorine or clarifier doesn’t eliminate the need for regular water testing, monitoring chemical levels, or maintaining proper pool chemistry. The feature could make routine care more convenient, but it shouldn’t be treated as a replacement for those responsibilities.
An optional 3-micron filter is available separately for finer particle collection, although regional availability should be confirmed.
No More Fishing Around for Your Pool Cleaner
Both new Beatbot models address one of the less glamorous aspects of robotic pool maintenance: getting the cleaner out of the water.
When the Sora Neo R finishes cleaning or its battery reaches 12%, it climbs to the pool’s surface, releases retained water through its SmartDrain system, and remains floating near the edge for retrieval.
If it drifts away, the Beatbot app can direct it back toward the edge, provided the cleaner is floating, has at least 5% battery remaining, and maintains a suitable connection.
The app also supports cleaning mode selection, cleaning history, status monitoring, and software updates over its 2.4GHz Wi-Fi and Bluetooth connections.
The Sora Neo R carries a two-year warranty, compared with the AquaSense 3’s three-year coverage.
Two Different Approaches to Less Pool Maintenance
The distinction between these cleaners comes down to what your pool requires and how much automation you’re willing to pay for.
The AquaSense 3 is the more sophisticated option, with debris recognition, floor mapping, targeted cleaning, shallow-platform coverage, and a substantially larger cleaning area. For a complicated pool that constantly collects leaves and other debris, those capabilities could justify its higher price.
The Sora Neo R makes more sense for smaller pools where straightforward cleaning, manageable weight, convenient retrieval, and integrated water treatment matter more than advanced navigation.
Both models’ runtime, coverage, and cleaning performance figures come from Beatbot’s laboratory testing, so real-world results may vary with pool conditions and debris levels.
The Beatbot Sora Neo R will carry a suggested retail price of $599, while the Beatbot AquaSense 3 will retail for $1,699. Exact consumer availability dates haven’t been announced.
You can learn more about both robotic pool cleaners, check availability, and explore purchasing options at Beatbot’s website.
Neither machine will relieve you of every pool-maintenance chore, but both are designed to reduce the amount of time spent doing the tedious ones. And when the alternative is spending another Saturday morning brushing walls and scooping leaves, that’s a fairly compelling reason to consider letting a robot take a turn.
Be the first to comment on "Beatbot Introduces AquaSense 3 and Sora Neo R Robotic Pool Cleaners for Different Pools and Budgets"