Soda Stream Penguin Starter Kit Review

Gear Diary is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn More.

Soda Stream Penguin Starter Kit Review Listen to this article

I’ve been writing for a long time, and one of the things that I learned early on, is that there’s a lot to like about most everything you get to review.  Your TRUE opinion usually hits after the honeymoon period is over.  THAT can last a couple of months, depending on the device/gadget/thingy you’re reviewing. Getting past the WOW factor is important, and most product reviewers just can’t do it in a couple of days to a week.

When I saw the Soda Stream Penguin Starter Kit, the wow factor for me was pretty high – a nine or a ten (on a 10 point scale), and I knew that any kind of review would take a while.  The device is, after all, pretty cool (more below); but let’s can the chit-chat and get down to brass tacks.  The Soda Stream Penguin Starter Kid – Yeah or Nay..?  Read on for a combo video/picture and text review.

SodaMaker
The Soda Stream Penguin Soda Maker Starter Kit

How to Make Your Own Soda – So Easy, Even a 4 year Old can do it!

I also noticed that much of the components in the machine are made of plastic.  During my review, the main part of the soda maker that controls the valve on the carbonator simply snapped.  I was shocked!  It just…snapped!  I tried a couple different types of Crazy Glues to fix it, and neither worked.  The plastic wouldn’t bond with the glue.  I even tried Gorilla Glue (it usually works with EVERYTHING, especially skin), and even it wouldn’t make the pieces stick together (it even expands to fill gaps as it cures). The type of plastic is unusual in the Penguin, so you need to make sure that it doesn’t drop, get bumped, etc., as if it breaks, you’re done.  In my case, it seems I encountered a very RARE manufacturing glitch. The replacement soda maker that I was shipped has really done well and hasn’t missed a beat, even when Sam and Josh help me make a batch of soda.

Photo-0003
See the # “4?” My original machine cracked diagonally through this area

This is the component that broke on me.  I’m not sure how or why; but I was told that it happens, but it is very rare.

Photo-0004
The carbonator (bottle of gas) screws into the machine here; but it needs to be TIGHT!

The plastic used here is very good at making a seal with the carbonator, but you need to make sure that the seal is tight. The pressures that we’re dealing with here are incredible, and you need to be careful.

Photo-0005

This is the piece that inserts into the water in the carafe.

The infuser inserts itself into the top of the carafe when the top closes and the gas shoots into the water through it.

Photo-0006

Only use an approved carafe in the machine.

Photo-0007

The inside of the carafe.

Price: The Soda Stream Penguin Starter Kit comes with the Penguin Soda Maker, 2 Carbonators, and 2 glass carafes, and retails for $249.99.  At the time of this writing, however, it is on sale for $199.95 directly from Soda Stream USA.  It can also be purchased at a number of different local retailers by using their store locator. Stocked products and prices will vary.

What I liked: Being able to create as much or as little carbonated beverage as I liked or needed. Making the soda is fun, and is easy for everyone to do. You control the degree of carbonation, so drinks are as flat or fizzy as you like.

What Needs Improvement: You have to like Splenda as a sweetener, or you’re not going to like the Soda Stream beverages. Most of them have a “diet” taste to them. Some more so than others. While this isn’t necessarily a bad thing, it is something you need to be aware of.  Splenda has a very distinct taste, and you have to like it if you’re going to like these beverages.

Plastic parts can sometimes break, as my soda maker experienced a “blow-out” while making a bottle one Sunday evening. Not even Gorilla Glue would fix it (due to the type of plastic used), and it glues nearly EVERYTHING.  Once it breaks, you’re done.

Conclusion: This is an AWESOME product; but the only way it makes sense economically is if you buy extra carafes, and stick to it.  After a while, the “fun” might wear off, and you’re simply stuck making soda. You also need to be satisfied with your super market’s brand of soda, as this is going to taste very similar to it.  However, you get to determine how much you make, how much syrup you use, the level of carbonation, and of course, you do make it with your OWN tap water.

A couple of items of note – You can ONLY carbonate water.  Any attempt to carbonate anything else other than water usually results in an overflow, regardless of how carbonated you make the beverage, making the machine very sticky. Attempting to carbonate an amount of water below the bottom of the infuser nozzle results in poorly carbonated water. Make sure you fill the carafe to the fill line.

From a “green” perspective, you completely eliminate cans and plastic bottles in your home; and the carbonators are easily recycled at a local retailer.  All in all, two green thumbs way up.

Litter-Robot - Black Friday Starts Now

As an Amazon Associate, we earn from qualifying purchases. Thanks for your support!


About the Author

Gear Diary Staff
Gear Diary was founded on September 30, 2006, with the goal to create a website that would not easily be labeled. Everyone who is part of Gear Diary is a professional who uses technology in their work and daily lives. On this site, we share our enthusiasm while exploring the gear we use — the equipment that makes our lives easier, more entertaining, more productive, and more manageable. Our hope is that Gear Diary visitors find this site to be a welcoming, friendly, and accessible place to learn about and discuss interesting topics — and not only those that are tech-related! Gear Diary is a place to discover and explore all kinds of new gear, including smartphones, computers, kitchen gadgets, Toys, EDC, camping gear, or even your next new car! You can follow us on Twitter @GearDiarySite.